The Driller can move by using the diesel engine connection hydrolic pump at 3 km/hr speed the whell hydrolics. After movement, during the hole drilling, the machine is fixed by hydrolic pistons from each side and made fixed position. The Drilling could be done by diesel engine or electric motor together. Main bom can drill right or left position by using CER to operate positioning at horizontal drilling. Vertical drilling could be made by any angle. Driller tubes can be carried by the machine. It is suitable to be placed the drilling or compressor as a diesel or electrical powered on the machine. Depends on the compressor can drill with a 8-12 bar drill power. Air consumption can change between 2,4m³/min - 4m³/min The drilling speed can change between 9 min/tube - 16 min/ tube according to the drilling power and drilled stone type.
TECHNICAL SPECIFICATIONS
